Raffia Cutting Machine for Plastic Tape
The PEDC-100 cuts plastic raffia and woven tape into short pieces for reprocessing. Mild steel body (90 in long, 3 ft wide, 42 in high), electric panel, 40 HP motor for rotor and blower, 100 kg/hr.
Specifications
| Model | Channel body | Channel size | Panel | Motor | Output |
|---|---|---|---|---|---|
| PEDC-100 | Mild steel | 90 in x 3 ft x 42 in | Electric | 40 HP for rotor and blower | 100 kg/hr |
Tell us your raffia type and output target and we’ll recommend the blade setup.
Cut raffia and woven tape for reprocessing
The PEDC-100 cuts plastic raffia and woven tape into short pieces so it can be fed to the next step in your recycling line. It has a mild steel channel body, an electric panel, and a 40 HP motor for the rotor and blower, at 100 kg/hr.
What to check
- Output is 100 kg/hr. Compare it with your daily raffia volume.
- Channel size is 90 inch long, 3 ft wide and 42 inch high. Check that you have the floor space.
- Motor: 40 HP for rotor and blower. Confirm against your plant’s power supply.
What to send us for a quote
- The material and its condition (clean, printed, wet, mixed)
- Your target output per hour
- Your plant’s power supply (voltage and phase)
- Photos or a short description of your current line
- Your city and country for delivery
- Type of raffia or tape (for example woven sacks or tape waste)
Send these on WhatsApp or the quote form and we will recommend a model.
Frequently Asked Questions
Plastic raffia and woven tape. Tell us your material and we will confirm it suits the machine.
It is usually sent to agglomeration or pelletizing. See Plastic Agglomeration Machines and Plastic Granules Making Machine.
The 40 HP motor drives both the rotor and the blower.
